Specifications
Stainless steel is nickel-bearing, 200 series minimum.
This material is NSF recognized for corrosion
resistance.
The DALPH1022 has two heated compartments, one
for plates and one for pellets, which are independently
controlled and have an automatic hi-temp shut-off.
Accommodates dishes and pellets ranging from 7" to 10
1/4"
Electrical: 208/220 VAC, 60 Hz, single phase.
Six foot grounded 20 amp power cord supplied.
NEMA 6-20P plug
Construction: The outer unit is constructed of 18 gauge
stainless steel. Inner walls constructed of .063 high
strength aluminum. All sides and lids of unit are
insulated with fiberglass insulation.
Lids: Unique hat-channel design requires no gaskets.
Heating System: Thermostatically controlled-forced air
heating system with 3200 watt element.
Self-Leveling Dispenser: Individual, removable, self-adjusting and all stainless steel
construction. Self-lubricating bearings ride over vertical guide rods. Available stacking height is
27 1/4".
Casters: Unit is mounted on four 5" diameter swivel casters with non-marking cushion tread,
two with swivel-lock and wheel with brakes.
Dimensions
Model
Overall Size
Casters
Shipping
Weight
Case
Cube
Electrical Specifications
W D H Type Dia. lbs. Cu. ft. Watt Amp Volt
DALPH1022
36" 24" 42 3/4"
4 swivel,
2 w/brake
5" 285 32.7 3200 17.2
208/220
60 Hz
Comments to this Manuals