ALLIANCE HA050L User Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Setting Dipswitches
70291801
14
Electronic Coin Drop 70294110
The electronic coin drop comes preset from the factory
ready to accept South African coins (dipswitch 14 in
OFF [Accept] position).
NOTE: Switch is in up position when ON (Blocked)
and is in down position when OFF (Accept).
The electronic coin drop is capable of accepting or
blocking coins based on the electronic signal
generated by the coins. If the drop is accepting invalid
coins (slugs, foreign coins, etc.), the tolerances can be
narrowed (valid coins may be occasionally rejected,
but they will be returned to the customer). To set the
drop to accept only medium tolerances, the dipswitch
for the wide tolerance must be in the ON (Blocked)
position. For instance, 1.00 ZAR wide (dipswitch 1)
should be in ON (Blocked) position. To completely
block a specific coin, the wide and medium tolerance
dipswitches for that coin must be in the ON (Blocked)
position.
Coin Output 1 of the drop is used for coins listed
below. The drop gives one signal for 1.00 ZAR, two
signals for 2.00 ZAR and five signals for 5.00 ZAR.
(Coin Value 1 on the electronic control must be set for
1.00. Refer to the control’s Programming manual for
instructions on setting coin values.)
Preset 70294110 Dipswitch Settings
Dipswitch Coin/Token Type
Blocked
(ON position)
Accept
(OFF position)
1 1.00 ZAR wide X
2 1.00 ZAR medium X
3 2.00 ZAR wide X
4 2.00 ZAR medium X
5 5.00 ZAR wide X
6 5.00 ZAR medium X
7Not used X
8 Teachmode X
9Not used X
10 Not used X
11 Not used X
12 Not used X
13 Not used X
14 South African currency X
15 Teachmode 15 X
16 Teachmode 16 X
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments