ALLIANCE HA050L User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Setting Dipswitches
15
70291801
Electronic Coin Drop 70294111
The electronic coin drop comes preset from the factory
ready to accept Euro coins (dipswitch 14 in OFF
[Accept] position). To change drop to block Euro
coins, dipswitch 14 must be in ON (Blocked) position.
NOTE: Switch is in up position when ON (Blocked)
and is in down position when OFF (Accept).
The electronic coin drop is capable of accepting or
blocking coins based on the electronic signal
generated by the coins. If the drop is accepting invalid
coins (slugs, foreign coins, etc.), the tolerances can be
narrowed (valid coins may be occasionally rejected,
but they will be returned to the customer). To set the
drop to accept only medium tolerances, the dipswitch
for the wide tolerance must be in the ON (Blocked)
position. For instance, 0.10 EUR wide (dipswitch 1)
should be in ON (Blocked) position. To completely
block a specific coin, all tolerance dipswitches for that
coin must be in the ON (Blocked) position.
Coin Output 1 of the drop is used for coins listed
below. The drop gives one signal for .10 EUR, two
signals for 0.20 EUR, five signals for 0.50 EUR, ten
signals for 1.00 EUR, and 20 signals for 2.00 EUR.
(Coin Value 1 on the electronic control must be set for
0.10. Refer to the control’s Programming manual for
instructions on setting coin values.)
Preset 70294111 Dipswitch Settings
Dipswitch Coin/Token Type
Blocked
(ON position)
Accept
(OFF position)
1 0.10 EUR wide X
2 0.10 EUR medium X
3 0.20 EUR wide X
4 0.20 EUR medium X
5 0.50 EUR wide X
6 0.50 EUR narrow X
7 1.00 EUR wide X
8 Teachmode X
9 1.00 EUR narrow X
10 2.00 EUR wide X
11 2.00 EUR narrow X
12 Not used X
13 Not used X
14 Euro currency X
15 Teachmode 15 X
16 Teachmode 16 X
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments