ALLIANCE HA050L User Manual download pdf (Page 12)

Tumble Dryer Operation

70381601

Changing Active Cycles

In non-card reader machines, the active cycle may be

changed at any time during tumble dryer operation. In

card reader machines, the active cycle may only be

changed if the vend price for all four cycle types is the

same. If the price differs for at least one of the cycles

(tiered pricing), the cycle type is locked in when the

cycle is started.

Opening the Tumble Dryer Door

Opening the tumble dryer door in a running cycle will

automatically stop the cycle. When the tumble dryer

door is opened, the DRYING LED or COOL DOWN

LED is turned off.

NOTE: When the door is opened during an active

cycle, the time will continue to count down and the

Four-Digit Display will toggle every five seconds

between showing “door” and the remaining cycle

time.

Once the tumble dryer door is closed, the START pad

LED flashes at one second intervals until the START

pad is pushed. Pressing the START pad will start or

resume the active cycle.

Figure 3

Signals

There are three instances when a signal may sound

during tumble dryer operation. The owner may

program the signal to be turned on or off (refer to

Programming MDC, option 16). These three

instances are listed below:

1. Keypad Depression Signal

The signal will sound for .25 seconds each time a

keypad is pressed.

2. Coin Input/Start Pulse Input/Card Insertion

Signal

The signal will sound for .25 seconds each time a

coin or start pulse is received or a card is entered.

3. Open/Shorted Thermistor Error

If an open or shorted thermistor is detected and

the Errors Mode is programmed on, the signal

will sound for up to 15 seconds.

Reversing (reversing models only)

Reversing machines are factory built with an auxiliary

board in the rear control tray that controls the forward

and reverse signals.

The board is set to rotate for 25 seconds, pause for six

seconds and then rotate in the other direction.

To disable the reversing option, unplug the H3

connector on the board for standard forward only

direction. Refer to Figure 4.

DRY545R

TMB2381N

Figure 4

TMB2381N

H3 Connector

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comments to this Manuals

No comments

ALLIANCE HA050L User Manual Page 12

Comments to this Manuals

Related products and manuals for Electric laundry dryers ALLIANCE HA050L