ALLIANCE HA050L User Manual download pdf (Page 37)

70381601

Collecting Audit Information

This feature allows the owner to retrieve audit

information stored in the tumble dryer by pressing a

sequence of pads on the control. For an explanation of

the audit options available, refer to the Audit Options

List on this page.

How to Enter Audit Feature

There are two methods the owner can use to enter the

Audit Feature.

Entering the Audit Feature by Manual

Mode

1. Control must be in the Manual Mode to start.

Refer to Entering the Manual Mode.

2. Press the LOW TEMP (∧) or the DELICATES

(∨) keypad until “AUdt” appears in the Four-

Digit Display.

Figure 45

3. Press the START (enter) keypad. “C1” will

appear in the Four-Digit Display.

Entering the Audit Feature with the Coin

Vault Open

(This method is not available if control is in OPL

Mode. Refer to Programming MDC, option 16, for

information on turning OPL Mode on and off.)

1. Open coin vault.

NOTE: The service door must be closed on

machines with controls that have software version

“S003” or higher.

2. Press START (enter) keypad.

How to Read Audit Data

1. Use the LOW TEMP (∧) or the DELICATES (∨)

keypad to scroll through various options until the

desired option is displayed in the Four-Digit

Display. Refer to Tab le 2 for an explanation of

the audit options available.

Table 2

2. Once the desired option appears in the Four-Digit

Display, press the START (enter) keypad once to

display the audit count. At this point, the display

will show the four-digit number of the audit

value.

3. Press the START (enter) keypad again. The

control will go to the next audit option in the

Audit Options List.

4. To select other audit options, repeat steps 1-3.

How to Exit Audit Feature When

Using Manual Mode

1. Be sure the control shows an audit option, not a

value.

2. While pressing and holding the HIGH TEMP

keypad with one hand, press the MED TEMP

keypad with the other hand. The control will

return to the previous mode of operation.

NOTE: To exit Audit Feature when using Coin

Vault Open method, close coin vault.

COM2R

COM2RCOM2R

Audit Options List

Four-Digit

Display

Description

C1 Total Number of Coins #1

C2 Total Number of Coins #2

CyC Total Number of Machine Cycles

TOC1 Total Number of Coin #1 TopOffs

TOC2 Total Number of Coin #2 TopOffs

SP Total Number of Start Pulses

TOSP Total Number of Start Pulse TopOffs

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

ALLIANCE HA050L User Manual Page 37

Comments to this Manuals

Related products and manuals for Electric laundry dryers ALLIANCE HA050L