ALLIANCE JT37CGI Service Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 101
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
M411429 7
Section 2 Introduction
© Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT
Safety Warnings and Decals
SAFETY WARNINGS and decals have been provided
in key locations to remind you of important precautions
for the safe operation and maintenance of your tumbler.
Please take the time to review these warnings before
proceeding with service work.
All decals have been designed and applied to withstand
washing and cleaning. Decals should be checked
periodically to be sure they have not been damaged,
removed, or painted. Refer to Parts Manual for
ordering replacement decals.
Safety Precautions for Servicing Tumblers
Disconnect electrical service.
Shut off supply gas valve before servicing gas
components.
Control panel and access panel MUST be
reinstalled after inspection or servicing of
tumbler is completed.
Use a non-corrosive leak detection fluid to check
all pipe connections for gas leaks. DO NOT USE
AN OPEN FLAME TO CHECK FOR GAS
LEAKS!
Chain/drive guard MUST be reinstalled after
inspection or servicing of tumbler is completed.
Belt guard MUST be reinstalled after inspection
or servicing of tumbler is completed.
Contactor box cover MUST be reinstalled after
inspection or servicing of electric and/or reversing
tumbler is completed.
Loading door switch MUST be operational before
putting tumbler into service.
Junction box cover MUST be reinstalled after
inspection or servicing of tumbler is completed.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 100 101

Comments to this Manuals

No comments